- 销售与服务热线
- 400 886 9608
轮边电机与轮毂电机相关知识
2023-03-30
近日，东风公司与本公司联合开发的轮毂电机装车并投入示范营运。很多读者想了解相关知识，这里给出一些基本普及知识。
轮边电机与轮毂电机最大的区别就在于轮毂电机的电机转子本身就是轮毂，而轮边电机轮毂和电机是分离的。
1、轮毂电机
轮毂电机是指电机转子本身就是轮毂，在转子上面安装轮胎。轮毂电机技术又称车轮内装电机技术，它将动力、传动系统和制动装置都整合到轮毂内。
电机的保养方法：
1、电机停止运行时，及时清除电机外部灰尘、油泥，保持电机清洁防止油、水进入电机内部，清洁时勿用水直接喷冲。
2、检查电机引出线是否有刮破，电机运行时是否有异响，必要时应送我们公司经销点处理，需请专业人士检查处理。
1. Hub motor
A hub motor refers to a motor whose rotor itself is a hub on which tires are mounted. Wheel hub motor technology, also known as wheel mounted motor technology, integrates power, transmission system, and braking devices into the wheel hub.
To put it bluntly, the most important thing is to install an "engine" inside the wheel, but this engine is electrically driven and independent.
2. Wheel side motor
"Wheel side motor" means that the hub and motor are separated, except that the motor is installed next to the wheel and directly drives the wheel through or without deceleration. There are usually two ways to drive a wheel motor: a hub motor and a narrow sense wheel motor.
Maintenance method of motor:
1. When the motor is stopped, timely remove the dust and oil sludge from the outside of the motor, keep the motor clean to prevent oil and water from entering the inside of the motor, and do not spray water directly during cleaning.
2. Check whether the motor outlet wire is scratched or not, and whether there is abnormal noise when the motor is running. If necessary, send it to our company's distribution point for treatment, and ask a professional to check and handle it.
3. If equipped, the chain motor should be regularly filled with lubricating oil.
轮边电机与轮毂电机最大的区别就在于轮毂电机的电机转子本身就是轮毂，而轮边电机轮毂和电机是分离的。
1、轮毂电机
轮毂电机是指电机转子本身就是轮毂，在转子上面安装轮胎。轮毂电机技术又称车轮内装电机技术，它将动力、传动系统和制动装置都整合到轮毂内。
说白了，最主要的就是把轮子里面装上“发动机”，只不过这个发动机是电力驱动的，而且是独立的。
轮边电机是指，轮毂和电机是分离的，只不过电机是安装在轮子旁边，通过或者不通过减速直接驱动轮子的。轮边电动机驱动通常有轮毂电动机和狭义的轮边电动机两种方式。
电机的保养方法：
1、电机停止运行时，及时清除电机外部灰尘、油泥，保持电机清洁防止油、水进入电机内部，清洁时勿用水直接喷冲。
2、检查电机引出线是否有刮破，电机运行时是否有异响，必要时应送我们公司经销点处理，需请专业人士检查处理。
3、有配备链条电机应定期给链条加注润滑油。
Recently, the hub motor jointly developed by Dongfeng Company and our company was loaded and put into demonstration operation. Many readers want to learn about relevant knowledge, and here are some basic general knowledge.
The biggest difference between a wheel side motor and a hub motor is that the motor rotor of the hub motor itself is the hub, while the wheel side motor hub and the motor are separate.1. Hub motor
A hub motor refers to a motor whose rotor itself is a hub on which tires are mounted. Wheel hub motor technology, also known as wheel mounted motor technology, integrates power, transmission system, and braking devices into the wheel hub.
To put it bluntly, the most important thing is to install an "engine" inside the wheel, but this engine is electrically driven and independent.
2. Wheel side motor
"Wheel side motor" means that the hub and motor are separated, except that the motor is installed next to the wheel and directly drives the wheel through or without deceleration. There are usually two ways to drive a wheel motor: a hub motor and a narrow sense wheel motor.
Maintenance method of motor:
1. When the motor is stopped, timely remove the dust and oil sludge from the outside of the motor, keep the motor clean to prevent oil and water from entering the inside of the motor, and do not spray water directly during cleaning.
2. Check whether the motor outlet wire is scratched or not, and whether there is abnormal noise when the motor is running. If necessary, send it to our company's distribution point for treatment, and ask a professional to check and handle it.
3. If equipped, the chain motor should be regularly filled with lubricating oil.